Your Partner in Simulation and Validation
dSPACE 工具链中的 ASAM 接口
dSPACE: ASAM 的创始成员
1998 年，欧洲领先的汽车公司成立了自动化与测量系统标准协会 (ASAM)，旨在减少汽车电子领域开发过程所需的成本和时间。作为其创始成员之一，dSPACE 早在 1996 年就参与了协会成立前的初始活动。ASAM 的目标是实现数据交换接口标准化和开发过程所用软硬件组件的兼容性。目前成员包括 Audi、Bosch、BMW、Daimler、GM、Porsche、Renault、Volkswagen 等著名公司。
AutomationDesk
| Type | Automated testing for hardware-in-the-loop (HIL) simulation |
|---|---|
| Functionalities | AutomationDesk is a powerful front-end tool for automated testing of the application software or diagnostic functions of electronic control units (ECUs) |
| Supported ASAM Standards | ASAM XIL, ASAM MDF, ASAM MCD-3 MC, ASAM MCD-3 D |
Bus Manager
| Type | Central tool for configuring the bus signals for various simulation platforms |
|---|---|
| Functionalities | The dSPACE Bus Manager is a powerful tool for configuring bus communication for simulation purposes, e.g., restbus simulation, and for implementing the bus communication in real-time applications for dSPACE SCALEXIO systems |
| Supported ASAM Standards | ASAM AE MCD-2 NET (FIBEX) |
ControlDesk
| Type | Experiment and instrumentation software for ECU development |
|---|---|
| Functionalities | The software includes functionalities for layouting experiments, instrumentation, measurement, post-processing, ECU calibration, as well as diagnostics access. It offers synchronized data capture across ECUs, RCP and HIL platforms, and bus systems, and has an integrated project and experiment management |
| Supported ASAM Standards | ASAM AE CDF, ASAM AE XIL, ASAM AE MCD-1 CCP, ASAM AE MCD-1 XCP, ASAM AE MCD-2 D (ODX), ASAM AE MCD-2 MC (ASAP2/A2L), ASAM AE MCD-2 NET (FIBEX), ASAM AE MCD-3 D, ASAM AE MCD-3 MC, ASAM MDF |
dSPACE ECU Flash Programming Tool
| Type | ECU flash programming |
|---|---|
| Functionalities | Software for programming the ECU flash memory via XCP on CAN, XCP on Ethernet, various types of on-chip debug ports like JTAG/NEXUS, NBD/AUD, JTAG/OCDS, DAP and JTAG/ SDI and the dSPACE Generic Serial Interface GSI2 |
| Supported ASAM Standards | ASAM AE MCD-1 XCP |
Ethernet Configuration Package
| Type | Hardware-in-the-loop (HIL) simulation |
|---|---|
| Functionalities | Convenient software tool for configuring a dSPACE system as a simulation node in an Ethernet network. It relies on network data available in a FIBEX or AUTOSAR representation and is dedicated to configure SOME/IP based simulations |
| Supported ASAM Standards | ASAM AE MCD-2 NET (FIBEX) |
Failure Simulation Package
| Type | Interface to dSPACE Failure Insertion Units |
|---|---|
| Functionalities | The Failure Simulation Package gives you quick and easy access to ASAM XIL-compliant failure simulation units. It provides API access according to the ASAM XIL API Electrical Error Simulation Port (EESPort) and uniform access to all dSPACE failure simulation systems. If you use dSPACE ControlDesk, the Failure Simulation Package offers an ASAM XIL API EESPort-compliant graphical user interface component that is available when the Failure Simulation Package is installed. |
| Supported ASAM Standards | ASAM XIL, ASAM GES |
dSPACE FlexRay Configuration Package
| Type | Hardware-in-the-loop (HIL) simulation and rapid control prototyping |
|---|---|
| Functionalities | Convenient software tool for configuring a dSPACE system as a simulation node in a FlexRay network. It relies on network and scheduling data available in a FIBEX or AUTOSAR representation. |
| Supported ASAM Standards | ASAM AE MCD-2 NET (FIBEX) |
Platform API Package
| Type | Package of application programming interfaces (API) for accessing simulation platforms |
|---|---|
| Functionalities | Program interfaces in .NET and Python for reading, writing, stimulating and capturing model variables on dSPACE real-time platforms |
| Supported ASAM Standards | ASAM XIL, ASAM MDF, ASAM GES |
RTI CAN MultiMessage Blockset
| Type | Tool for combining dSPACE systems with CAN communication networks |
|---|---|
| Functionalities | The RTI CAN MultiMessage Blockset is an extension for Real-Time Interface and can be used for combining dSPACE systems with CAN communication networks and for configuring these CAN networks |
| Supported ASAM Standards | ASAM-MCD-2 D (FIBEX) |
RTI Bypass Blockset
| Type | Rapid control prototyping (primarily bypassing) and hardware-in-the-loop (HIL) simulation |
|---|---|
| Functionalities | Simulink® blockset providing ECU read and write access from dSPACE real-time platforms via different kinds of ECU interfaces such as CCP, XCP, DPMEM PODs or on-chip debug ports. The blockset is especially designed for the dialog-based configuration of bypass applications. It allows ASAM MCD-2 MC (ASAP2) files to be imported and ECU variables to be selected via a convenient browser. It handles conversion formulas and the selection of bypass hooks automatically. In addition, the RTI Bypass Blockset supports on-target (internal) bypassing, allowing the bypass model to be compiled and downloaded directly into the free flash memory and RAM of the target ECU. For this, model parameters and signals are automatically added to the ECU’s ASAM MCD-2 MC (ASAP2) file |
| Supported ASAM Standards | ASAM AE MCD-1 CCP, ASAM AE MCD-1 XCP, ASAM AE MCD-2 MC (ASAP2/A2L) |
RTI LIN MultiMessage Blockset
| Type | Tool for combining dSPACE systems with LIN communication networks |
|---|---|
| Functionalities | The RTI LIN MultiMessage Blockset is an extension for Real-Time Interface and can be used for combining dSPACE systems with LIN communication networks and for configuring these LIN networks |
| Supported ASAM Standards | ASAM-MCD-2 NET (FIBEX) |
SystemDesk
| Type | System and software architecture development |
|---|---|
| Functionalities | SystemDesk supports the development of software architectures and distributed automotive electrics/electronics (E/E) systems. Such systems can be modeled according to the AUTOSAR standard. Existing communication matrix files can be imported in SystemDesk to specify network communication. When AUTOSAR software components are modeled or imported in SystemDesk, available ASAM MCD-2 MC (ASAP2) models can be imported as well. During generation of the AUTOSAR run-time environment (RTE) and virtual ECUs (V-ECUs), ASAP2 file generation is also performed for variables that are tagged for calibration and measurement according to the AUTOSAR concept. When V-ECUs are built, instances of the XCP service (XCP on Ethernet – TCP/IP) are implemented in the V-ECU code. Thus, the V-ECUs and variables described in the ASAM MCD-2 MC (ASAP2) files can be accessed during simulation |
| Supported ASAM Standards | ASAM AE MCD-1 XCP, ASAM AE MCD-2 MC (ASAP2/A2L), ASAM AE MCD-2 NET (FIBEX) |
TargetLink
| Type | Production code generation (for ECU development) |
|---|---|
| Functionalities | TargetLink is a software system that generates production code (C code) straight from the MathWorks® Simulink®/Stateflow® graphical development environment. The C code generation options range from plain ANSI C code to optimized fixed- or floating-point code for AUTOSAR platforms. Versatile code configuration options ensure that the production code copes with processor constraints. Converting graphical models directly into production code ensures perfect consistency between model and code at all times. Since the same model will always result in the same proven code, TargetLink’s code generation is deterministic and thus guarantees the highest software quality. Every step can be tested against the specification via the built-in simulation features |
| Supported ASAM Standards | ASAM AE MCD-1 CCP, ASAM AE MCD-1 XCP, ASAM AE MCD-2 MC (ASAP2/A2L) |
Variable Editor
| Type | Variable description file editor |
|---|---|
| Functionalities | Convenient tool for visualizing, editing and creating ECU description files according to the AE MCD-2MC standard |
| Supported ASAM Standards | ASAM AE MCD-2 MC (ASAP2/A2L) |
VEOS
| Type | PC-based simulation platform for electronic control unit development |
|---|---|
| Functionalities | VEOS is a PC-based simulation platform for Virtual Validation in the development of electronic control units (ECUs) and systems. |
| Supported ASAM Standards | ASAM AE XIL-MA, ASAM AE MCD-1 XCP, ASAM AE MCD-2 MC (ASAP2/A2L) |
dSPACE XCP Service
| Type | XCP service to be implemented on the ECU |
|---|---|
| Functionalities | ECU service code for XCP on CAN and Ethernet (TCP/IP, UDP/IP) supporting measurement, calibration, bypassing and ECU flash programming |
| Supported ASAM Standards | ASAM AE MCD-1 XCP |
推动创新进程。我们始终在技术开发的最前沿。
欢迎订阅我们简讯，了解我们的专业技术以及产品。希望我们的成功案例能够对您有所帮助。快速了解仿真和验证的最新信息。欢迎订阅/管理dSPACE简讯和dSPACE航空速报。