At the signal level, the test system is connected to internal interfaces of the electric drive control unit, i.e., to the signals of the gate drivers and to the signals of the current transducers. Any power electronics devices are disconnected from the device under test. This approach enables maximum scalability and full model access. This example describes FPGA-based simulation with SCALEXIO. FPGA-based simulation is typically used if very high computation speed is needed.
If you do not need high computation speed, you can also perform processor-based electric motor simulation tests with SCALEXIO. The motor and inverter models are then computed on the SCALEXIO Processing Unit.
The dSPACE FPGA base boards have been designed for applications that require very fast, high-resolution signal processing, such as electric motor HIL simulation. They include powerful, field-programmable gate arrays (FPGAs) from Xilinx®. When combined with the XSG Electric Components Library, the FPGA base boards provide the fast reaction times required for simulating electrical machines in closed-loop operation with a controller.
Different FPGA I/O modules are available for expanding the I/O channels of the FPGA base boards. They provide the high number of digital and analog I/O channels needed for applications such as electric drives.
The SCALEXIO system for HIL simulation provides a wide range of I/O hardware, which enables you to connect various converter and motor types. You can program applications for the FPGA of the dSPACE FPGA base boards with Xilinx System Generator, and the RTI FPGA Programming Blockset enables the I/O and processor access. The programs can be downloaded to the FPGA via ConfigurationDesk.
You can test the program in an offline simulation before implementing it on the real-time hardware. This lets you react flexibly to new requirements, such as new interfaces or having to accelerate the execution of submodels.
Electric motor control applications that demand very high precision and correspondingly high sampling rates are best simulated on field-programmable gate arrays (FPGAs). The XSG Electric Components Models (closed-loop simulation components) are implemented as Xilinx System Generator (XSG) models that run on a dSPACE FPGA base board, so you can use the same workflows for controller development and testing. This makes it possible to perform closed-loop simulations of electric devices and their controls at very high sampling rates in real time.
In addition to the plant models, the XSG Electric Components Library provides enhanced I/O functions to be used on the dSPACE FPGA base boards for a wide range of position sensors and PWM capturing. The XSG Electric Components Library and the FPGA base boards can be used together for E-motor simulation at both the signal and the power level.
Components and Characteristics
Subscribe to our newsletters, or manage or delete your subscriptions